Nomadix USG Configuration
From WirelessOrbit
This guide will walk you through setting up the Nomadix USG to work with Wireless Orbit. If you need information on basic configuration of the gateway, please consult the external links section of the Nomadix USG page of this wiki.
Authentication, Authorization, and Accounting Settings
After logging into the Nomadix USG's administration interface, click on Configuration on the menu on the left and then on AAA under it. You should now be at the Authentication Authorization and Accounting Settings page. From here:
- Click on the AAA Services checkbox
- Click on the Internal Web Server checkbox
- Click on the Portal Page checkbox
- In the Portal Page URL blank enter the login portal URL for this gateway. If you don't already know what this URL is, just check the gateway details in the Gateways page of the Control Center.
- Click on the Usernames checkbox
- Click on the Apply button at the bottom of the page
RADIUS Settings
Now click on the RADIUS Options link in the menu on the left (under the Configuration section). You should now be at the RADIUS settings page. From here:
- Click on the Enable RADIUS Authentication checkbox in the Authentication section
- Click on the Enable RADIUS Accounting Service checkbox in the Accounting section
- In the Primary IP blank enter "69.36.234.20"
- In the Primary Port blank enter "1812"
- In the Primary Secret Key blank enter the secret key you defined in the RADIUS profile for this gateway (in the Control Center). If you're not sure what that is, just check the gateway details in the Gateways page of the Control Center.
- Click on the Enable URL Redirection checkbox in the Miscellaneous Options section
- Click on the Submit button
You must now reboot the gateway, so click on Restart.
Passthrough Address Settings
After the gateway has rebooted, log back into the administration interface and click on the Passthrough Addresses link in the menu on the left (under the Configuration section). You should now be at the passthrough address settings page. From here:
- Click on the Passthrough Addresses checkbox
- In the IP/DNS Name blank enter "portal.wirelessorbit.com" and then click on Add
- In the same way, add the hostnames of any payment gateways you're using
- Click on the Apply button