Handlink WSG-4000 Configuration
From WirelessOrbit
This guide will walk you through setting up the Handlink WSG-4000 to work with Wireless Orbit. If you need information on basic configuration of the gateway, please consult the external links section of the Handlink WSG-4000 page of this wiki.
Login Page Setup
After loggin into the WSG-4000's administration interface, click on the Advanced Setup tab at the top of the screen and then the Login Page link in the menu to the left. On the Login Page setup page:
- Click on the Redirect checkbox
- In the Redirect Login Page URL Link blank enter the login portal URL for this gateway. If you don't already know that this URL is, just check the gateway details in the Gateways page of the Control Center.
- Click on the Apply button at the bottom of the page.
Authentication Setup
Now click on the Authentication link in the menu to the left. From the Authentication screen:
- Click on the Radius Server checkbox
- Click on the Accumulation checkbox
- In the Primary RADIUS Server Server IP/Domain Name blank enter "69.36.234.20"
- In the Authentication Port blank enter "1812"
- In the Accounting Port blank enter "1813"
- In the Shared Secret Key blank enter the secret key you defined in the RADIUS profile for this gateway (in the Control Center). If you're not sure what that is, just check the gateway details in the Gateways page of the Control Center.
- Click on the Enable checkbox in the Accounting Service section
- From the Authentication Method pulldown select PAP
- Click on the Apply button
You must reboot the gateway for the settings to be applied. Click on Restart to reboot the gateway.
Walled Garden Setup
After the gateway has finished rebooting, log back into the administration interface. Click on the Walled Garden link in the menu on the left (from the Advanced Setup tab). From here:
- In the first Name blank enter "Wireless Orbit"
- In the first URL blank enter "portal.wirelessorbit.com"
- In the same way, add the hostnames of any payment gateways you're using
- Click on the Apply button at the bottom